Adam's Swirl & Haze Remover Car Polish

SKU:D005

Price: $19.95

Adam's Swirl & Haze Remover Car Polish

Gently massage swirl marks, oxidation, fine blemishes and hazy paint back to gleaming perfection with Adam's Swirl & Haze Remover Car Polish. It's your dual-action car polisher's new best friend!

Oh, those stubborn swirl marks! You can polish and polish and still they don't seem to go away.

Adam's has the cure, it's Adam's Swirl & Haze Remover Car Polish. When used with Adam's Swirl Killer Foam Pad (orange), you're got a swirl, haze, and fine scratch removal solution that can't be beat. Guaranteed!

Unlike traditional over the counter car polishes, Adam's Swirl & Haze Remover Car Polish uses premium alumina abrasives that are finer and work longer. The result is a car polish that gently massages swirl marks away, rather than abrasively cutting them away and leaving a dulled finish.

Adam's Swirl & Haze Remover Car Polish is formulated for use with professional grade dual-action car polishers, like the Porter Cable 7424. Dual-action car polishers operate at very high speeds (up to 6,000 oscillations per second), but the pad throw is very short. This requires the polish to be formulated with superior lubrication so the polish can be worked longer without drying out or scouring your car's paint.

Adam's Swirl & Haze Remover Car Polish is forgiving enough for a novice, yet it creates crystal clear paint finish that will please even the most seasoned professionals. Find out just how easy swirl removal and a high gloss finish can be with Adam's Swirl & Haze Remover Car Polish. For the ultimate show car finish, follow swirl removal with Adam's Fine Machine Polish, and take your paint gloss to a whole new level. Guaranteed!

TIP: Adam's Swirl & Haze Remover Car Polish can be applied by hand or dual-action polisher (recommended). When applied by machine, use in conjunction with Adam's Swirl Killer Foam Pad (orange).

TIP: Adam's Swirl & Haze Remover Car Polish is concentrated. Use only 5-6 pea-size dabs at a time on your pad. Work in well until the polish film is nearly gone. Do not work the polish until dry, as this may cause hazing.

TIP: When using Adam's Swirl & Haze Remover Car Polish followed by Adam's Fine Machine Polish, you can save a step by applying Adam's Fine Machine Polish directly over the polish film left by Adam's Swirl & Haze Remover Car Polish. It's faster and easier!

Detailing Video for HAND APPLICATION:

Detailing Video for MACHINE APPLICATION:

Chapter 14 - Machine Polishing

Adam's Clay Bar & Detail Spray Combo
$32.95

Adam's Dual-Action Swirl Killer Pad
$12.95

Adam's Fine Machine Car Polish & Machine SuperWax
$44.95

Product Rating:

(5.00) # of Ratings: 4 (Only registered customers can rate)

(Only registered customers can rate)

1 - Terrible

2 - Bad

3 - OK

4 - Good

5 - Great

50%

100%

Sort: New to Old RE-SORT COMMENTS:

Showing comments 1-3 of 3

1. Shane on 4/29/2009, said:

This product works great at removing swirls from your finish, especially when combined with Adam's Orange swirl killer pad. I use this product all the time and it works great on all different types of clearcoats (hard or soft). I was really impressed with the gloss and depth after using this 'strong' of a polish. It barely needs any polishing down with the fine machine polish. Truly impressive product!
Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

2. Justin on 4/28/2009, said:

All I can say is amazing! I used this product by hand to remove some scratches I had on my bumper. Using the technique shown in Adams's DVD I was able to remove the scratches. Now that I use it with the PC swirls are nonexistent on my paint.
Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

3. kevin on 4/28/2009, said:

The Swirl & Haze Remover has enough bite to take out those stubborn swirls and scratches. It can also be combined with different pads and polishes to tackle any job! A must have in your arsenal!
Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

Showing comments 1-3 of 3